Important Things You Need to Know About Seal Coating Your Driveway or Parking Lot

Each year between September to October, a lot of people are sealcoating their parking lots and driveways, but why? What is the reason why you have to seal coat your asphalt pavement and driveways? Seal coating is referred to the process of emulsion application over the existing asphalt surface, which will seal as well as fill small cracks and voids. This certain process can be done in order to prevent any additional damages to your pavement by chemicals and weather in contact with your parking lot or driveway.  

 Seal Coating

When and How Soon Should a Seal Coating Process Be Done?  

Seal coating your parking lot can be normally applied a year after your initial asphalt pavement has been placed in order to allow proper cure as well as wear of the surface of your pavement. But, it’s highly recommended that you seal coat your pavements and driveways at least every 2 to 3 years, going down to 1 year occasionally, depending on the condition of your pavement as well as the traffic. Once it has been applied, you’ll need to protect your parking area at least 48 hours as it is the recommendation in order to allow for the applied chemical to set in properly and cure. Depending on the recommendation of the manufacturer, the best time of the year to have your parking area seal coated is the one on which the temperature will drop to at least 55 degrees so that the surface can be able to cure properly. However, you should also watch out for the debris and leaves may degrade the coating once it has been already applied as well as before it has set completely.   

How Much Does It Really Cost to Seal Coat a Parking Area?  

Reliable sources indicate that the usual average cost for materials in order to seal a driveway or parking space is around forty cents per square foot.   

It may be higher basically depending on the location that has to be covered, therefore you may want to factor in added forty to sixty cents for the labor fee. Typically, a driveway seal coating job can be done for approximately one dollar per square feet. However, it still all depends on the conditions and size of the driveway. In addition to that, you should bear in minds that the walls, as well as any other obstacles that hinder you from applying the sealing with a squeegee, will eventually incur costs to your project.  

How Many Kinds of Seal Coatings Are Available?  

As a matter of fact, there are two major products that are available in the market today: asphalt emulsion coatings and coal tar sealers. While these are accessible by anyone, it is still best that you consult from a professional and reputable parking lot or drive way seal coating service provider in your area since they are the ones who know exactly what type of seal coating your parking lot or driveway needs and for you to have a quality and dependable parking lot sealcoating in Long Island.

Leave a Reply

Your email address will not be published. Required fields are marked *